Replacing a toilet seat is not hard. You just need some basic tools and the know-how to do it. You can call a plumber if you like, but he will charge you for the service. How about doing interest is all about how to replace a toilet seat with patience. It is not hard. You need a few minutes and how to replace a toilet seat is done.
Steps to Replace A Toilet Seat
Here are few steps that are easy to follow to replace any kind of toilet seat. So, let’s go to do it right now.
The first thing you have to do is look at the bathroom where the toilet seat was installed. Measure the area with your tape measure; you will need it for shopping purposes. It’s better to buy a toilet seat that is slightly larger than the original one because urine and water can damage it. The cheap ones are made of plastic, so take care of them.
The next step in how to replace a toilet seat is removing the original seat from the plastic bolts that hold it to the bathroom’s floor or wall. Use your pliers and turn the nuts by hand, then disconnect them from the bolts. Remove all parts carefully and place them where they won’t get lost easily.
Step 1 – Toilet Seat Removal
The next step is to disconnect the water supply line. If you see a small hose, turn it off and let all water out of the tank. Use your pliers again to remove the nut at the bottom of the tank and pull off whatever part connects that hose with it. It’s better if you place the water valve in a safe place in case you need it later.
Step 2 – Disconnect Water Supply Line
There is another line that has two nuts on top of the tank; remove them and set them aside. Put tape over your nut’s threads so they won’t slip out during installation. If you have metal nuts, just twist them off.
Step 3 – Remove the Water Supply Lines from the Tank
It’s time to remove all components from your toilet seat and this includes bolts, nuts, washers, and screws. Be careful with nuts and tighten them properly so they will hold up the weight of the toilet seat. Put everything in a safe place so you won’t lose any of it. Make sure that you have enough time at your disposal because how to replace a toilet seat can be quite interesting and time-consuming if you don’t have the right tools for the job.
Step 4 – Remove all Components from Your Toilet Seat
The next step is to unscrew the bolt on the top of your tank inside the bathroom. This bolt is connected to a nut on top of the toilet seat, so you have to disconnect it before trying how to replace a toilet seat. Keep bolts for later use; you will need them eventually.
Step 5 – Unscrew Top Bolt in the Tank
Now you can install your new toilet seat and tighten all nuts properly. If you have a plastic seat, make sure that bolts are tight enough. If they get loose, your toilet will start leaking and it’s very hard to repair it because most parts inside are of an odd size.
Step 6 – Install New Toilet Seat with Properly Tightened Nuts
You can also reattach the water supply hose if you took it off before. Reconnect the hose to the water valve and make sure that it will last for years before you hit the road with your family. If there is a leak, turn off both water lines in the tank to avoid flooding or water damage.
Step 7 – Connect Water Supply Line if Needed
Check everything in how to replace a toilet seat and tighten nuts one more time. If everything is in place, just put the bolts back on top of your tank, and you are done!
Spring-Loaded Toilet Seat Hinges
Inspect the toilet seat for any damage or defects. If there is no damage, remove the old toilet seat by unscrewing it from the bolts. Clean off any remaining adhesive with a putty knife. Apply new sealant to prevent leakage around the bolt holes and screw in the new toilet seat into place until tight.
- Inspect the toilet seat for any damage or defects.
- If there is no damage, remove the old toilet seat by unscrewing it from the bolts.
- Clean off any remaining adhesive with a putty knife.
- Apply new sealant to prevent leakage around the bolt holes and screw in the new toilet seat into place until tight.
- To replace screws from under the toilet bowl- use pliers first so as not to strip them out! Use a screwdriver if necessary! Remember- don’t over-tighten screws when replacing them!!!
Repair Cracked Toilet Seats
Not all cracks in a porcelain or ceramic toilet seat will damage the underlying glaze. That is, the glaze layer that covers a ceramic toilet seat will be unharmed if it has not been chipped away. Simply use an appropriate glazing product, available at any hardware store to fill the crack and use a damp cloth to smooth over the material. Allow it to dry for a day or two before attempting to use the toilet seat again.
If you have a crack that extends through the glazing, then it is too late to save the toilet seat. You will need a new seat and here are some steps you can follow to remove the old one:
- Identify the screws that hold the toilet seat in place. Common locations are around the edge of the bowl, underneath, and on the underside of the lid.
- Use a screwdriver to remove the nuts and/or screws. Some will unscrew, while others might require prying with a screwdriver.
- Remove the toilet seat from the bowl and dispose of it properly by putting it in a plastic bag that is tied closed and putting it in the trash.
- Reattach the toilet seat to the bowl by aligning its position and setting its screws or nuts into place.
- Allow 24 hours before sitting on your repaired toilet seat!
What Are The Dangers Of Not Replacing Your Old, Worn-out Toilet Seats?
There are several problems with replacing toilet seats. First of all, if you have a wooden seat or lid, the wood will begin to warp and crack. This will cause the seat or lid to become loose, and therefore unsafe. What are some other problems associated with old toilet seats?
- Toilet seats are a breeding ground for bacteria.
- You could spread germs to your family and friends when you visit the bathroom.
- The risk of slipping is greater if you don’t replace your toilet seat regularly.
- If you have children, they may be at risk for injury from a loose or broken toilet seat that can fall off unexpectedly.
- Older toilets are more likely to break down in other ways, such as leaking water onto the floor.
- Replacing your old toilet seat will save money on repairs over time.
The Benefits Of Replacing A Toilet Seat
- The biggest benefit of replacing your toilet seat is preventing the spread of disease. The old saying, “Out of sight, out of mind,” doesn’t apply when it comes to your toilet seat. The longer you wait to replace it, the greater the chance that disease-causing organisms will build up. The process of replacing your toilet seat is relatively simple, and it will have your bathroom looking new in no time.
- If you are still unsure about replacing your toilet seat, think about the facts and make a decision. The next time you go to replace it, you’ll see just how easy it is!
- Toilet seats are a breeding ground for bacteria. The longer you wait to replace the toilet seat, the greater the chance that you could be spreading disease. The most commonplace diseases are E Coli and Staph infections. The longer it remains there, the more likely it is that disease-causing germs The risk of slipping is greater if you don’t replace your toilet seat regularly The chances of slipping are greater if you don’t replace your toilet seat regularly. The older the toilet seat, the more likely it is to have a crack or chip. The smaller the chip or crack, the easier it is to miss.
Why It Is Important To Have Fresh, Clean Toilets In Your Home
- The toilet is one of the most used and important fixtures in a home.
- Dirty toilets can be embarrassing for guests, especially if they are going to stay overnight.
- Cleaning your toilet regularly will help prevent bacteria from growing on the surface.
- Regularly cleaning your toilet can also help prevent clogs and other plumbing problems that may occur as a result of not keeping it clean.
- A cleaner bathroom means less work for you because it’s easier to keep up with this way.
- It’s quicker to clean when there isn’t any buildup or dirt on the floor or walls around the toilet itself.
- Having a sparkling, clean toilet can make your home feel more welcoming, and it will help guests to forget about using a public bathroom.
The toilet is one of the most used and important fixtures in a home. So, we should keep it clean. As well as replacing your toilet seat, always remember to clean the inside of the bowl as well. It’s a good idea to have a disinfectant such as Lysol Bathroom Surface Disinfectant Spray on hand for this purpose. We hope that you found our article informative in regards to replacing your damaged or old toilet seats with new ones.