Did you know that the rust in your toilet bowl is a very common problem? It seems like no matter how hard you scrub. There is always more rust. But don’t worry. Here are some simple steps to remove rust from the bottom of your toilet bowl.

Removing Rust Stains from A Toilet Bowl

Here is an easy and effective method for removing rust stains from a toilet bowl. I use this in my own house, and it never fails me!

Step# 01

Before you scrub the stain, wet down your toothbrush with some warm water (make sure to not get any soap in there). Now start scrubbing at the stained area using the brush. Continue rubbing until all of that little “red threads” come out with ease.

This will take a while because they can be deep in there no matter how hard you try to reach them without scratching the side of your toilet tank or bowl. Once you have gotten those stains, rinse off your toothbrush and repeat step 1 until the stain is completely gone!

Step# 02

Now that the rust stain has been removed from your toilet bowl. Wet a cloth with some warm water as well as this libellous “goop” solution made by Nature’s Miracle. Apply it after rinsing down all of your toothbrushes. This will help to remove any stubborn leftover remnants of dried up fluid or droplets.

The hard water stains dry completely before using your toilet and fixtures bowl again (about 20-30 mins). That should be all you need to do step right!

What is Rust Toilet Cleaner?

Rust is the rusting of iron or steel in contact with oxygen. It usually occurs when rust is exposed to water. But it can also occur in other environments like saltwater and acidic solutions. Rust tends to accumulate on metal surfaces that are exposed to moisture for long periods of time (for example, inside a building).

Why Does Rust form in Your Toilet Bowl?

A toilet can rust because of a variety of factors. Although it may not be a bad thing. The reason depends on how much hard water stain gets in contact with iron or steel surfaces every day. The tinier scratches and dents will produce oxygen. Which promotes the oxidation process to occur quickly by releasing hydrogen atoms from hydrated monatomic oxides (rust). In essence, dust particles get out their way into rusty areas where they add up other kinds of compounds that eventually form ash through millions of solar cycles over time.


Here are some frequently asked questions to know to remove rust from the bottom of the toilet. See these questions and know the questions answers.

Q: Can Vinegar and Pumice Soda be used to Remove Rust?

A: Yes, you can use pumice vinegar or baking soda rust remover for cleaning the toilet. But only on surfaces that are thoroughly cleanser. That means the bottom of the toilet bowl should not be used for cleaners like bleach or ammonia. Because it could damage plumbing components and rubber hoses!

Q: Why is the Bottom of the Toilet Bowl Brown?

A: There are a few reasons why the bottom of your toilet bowl stains may be brown.

The most common reason is that you have a ring of rust on the bottom of your toilet tank. If this is the case, it’s best to replace the toilet tank instead of trying to clean it off.

Q: Can the Borax Powder be used to Remove Rust?

A: Sure can. And it’s a good idea to try this first on the top of your toilet bowl as an experiment plumber before taking on any other methods. It will begin dissolving rust. But only if the surface is very clean and free from grime or dirty fingerprints, lemon juice.


In all, there are a lot of reasons why you have rust on your toilet. Fortunately, it is easy to remove the stains from ceramic toilets bowls with some common household cleaners and rejuvenate these components after many years of usage. If you read this article then you will to know why is your bathroom rust?