If you are looking for a guide on how to remove a toilet, then you have come to the right place! This blog post contains 100% complete guidance on how to remove a toilet. We will cover everything from what tools and materials you need, where to store them, how much space is needed in your home or business before starting the project, and more. If you’re ready for some straight talk about how to remove a toilet – keep reading!
What is A Toilet?
A toilet is a plumbing fixture that has three parts: the bowl, the tank, and the seat. It’s designed to be used as an alternative method of disposing of human waste – in other words, we use it for pooping! Although many people think they understand how toilets work, there are some nuances about them that most folks don’t know about. For example, did you know…
- Do Do Flushing mechanisms vary from one type of toilet to another?
- Does your average toilet use around two gallons of water per flush?
When You Should Remove A Toilet?
The last thing you want to do is remove a toilet when it’s not necessary. At the same time, there are certain times in your life – such as getting married and having children or moving house- where a new toilet will be needed. Knowing how to remove a toilet can come in handy for various reasons!
Toilet Removal Kit List
- A toilet plunger (if the water is not going down).
- Bucket with lid and jug for carrying out wastewater or sand to pour around the base of the toilet – this helps stop sewer gas from coming up through pipes if there’s no access point.
- Any necessary tools, which might include pliers, screwdriver, wrench and hacksaw. This will depend on how your particular type of toilet was assembled together. For example; it would be easier to remove an old-style cast iron flange than a modern plastic one!
DIY Guide: How To Remove A Toilet?
There are plenty of videos on Youtube that provide helpful tips about how to remove a toilet. Some have an especially hard time removing their old toilets because they’re either located behind their walls or underneath floors, which makes them difficult to access without breaking through some other part of the home like its floor. Others may find themselves with no choice but to break through things if they don’t know how to remove a toilet.
To overcome this issue, here are some helpful tips:
- Ensure that you have the correct tools for the job before beginning any work. You’ll need either an Allen key or a wrench to loosen and unscrew pipes from their fittings. If it is near impossible to reach behind your toilet to access these fitting nuts, then you will also want a large basin in which to place them as well as watertight gloves so you’re not left with dirty hands and fingers after removing all of those parts!
- The first step is always going to be disconnecting your old drain pipe’s U-bend by loosening its wing nut using pliers (or just about any other type of tool) while taking care not to disconnect the other pipe that empties outside of your house.
- Next, remove the bolts from around the toilet’s mounting ring so you can separate it from its base and get down to business with unscrewing any remaining nuts holding onto different parts as well as those attached to water supply pipes.
- If all goes according to plan, you should now be able to restore a shiny new toilet in place without having caused any mess or damage (aside from maybe some dirt on your hands). Good job!
- (You may have noticed this is just one way how removal instructions could go – there are many ways!).
- Steps: Disconnect old drain pipe U-bend by loosening wing nut using pliers Remove cistern and trap using screwdriver Remove bolts from around mounting ring Loosen nuts holding onto different parts as well as those attached to water supply pipes.
- Next, you may wish to clean up the place a bit with some of that wet work!
- Remove any old sealant or residue on cistern walls by scrubbing it off. Rinse thoroughly afterward. Once dry, apply new sealant before installing your shiny new toilet (this is the time where I would usually also recommend applying new wax strips for easier cleaning). Finally, connect all necessary connections back in their places. You’ll then be able to flush away your worries like never before – phew!
- 100% Complete.
Caution
To remove a toilet you should be careful from breaking any piece of pipe.
To remove a toilet you should be careful from breaking the sealant on the cistern wall.
If you do not know how to properly disconnect water supply pipes, then it is better that call professionals for help and advice.
Do not use your hands while unscrewing bolts attached to the mounting ring as this may cause injury or damage to the skin with sharp edges of nuts typically found in these areas. Always wear gloves before doing so!
Conclusion
If you are looking for a complete set of instructions on how to remove your toilet, we’ve got what you need. From the tools and materials needed to find any potential septic tank leaks or plumbing problems that could be causing the problem in the first place, it is all here at 100% Complete Guidance On How To Remove A Toilet!
